• Guangzhou Shusen Trading Co., Ltd.
    Rafaël
    Le lancement de produit est très professionnel, l'attitude de service est très bonne, la qualité du produit est haute, et continuera à soutenir.
  • Guangzhou Shusen Trading Co., Ltd.
    Charles
    Le personnel de service est très professionnel, avec un large éventail de produits et de prix garantis. Chacun peut le choisir. J'espère que la société deviendra meilleure et meilleure.
Personne à contacter : Sylvia
Numéro de téléphone : +86 13719030715
WhatsApp : +8613719030715

HS420AR12-9 Bare projector lamp NEC Projector Bulbs Original new NP42LP

Lieu d'origine La Chine
Nom de marque NEC
Numéro de modèle HS420AR12-9
Quantité de commande min 1 morceau
Prix Negotiated
Détails d'emballage Boîte de carton
Délai de livraison 3-7 jours de travail
Conditions de paiement L/C, D/A, D/P, T/T, Western Union
Capacité d'approvisionnement 1000 morceaux par an
Détails sur le produit
Espérance de vie 2000hours Garantie 90 jours
Application École, bureau, maison, éducation, affaires nom de produit Ampoule de lampe de projecteur
Éclat Intense luminosité avec le brûleur original à l'intérieur Tension tout le pays
Type bas HS420AR12-9 Puissance évaluée 420W
Laisser un message
Description de produit

HS420AR12-9 Bare projector lamp NEC Projector Bulbs Original new NP42LP
 
HS420AR12-9 NEC projector bare lamp , all items are 100% new and pass the quality checked. And will be packaged in good condition before dispatch. 100% Brand New, Premium quality, high brightness, long life replacement projector lamp. Compatible for PA803U+,PA653U+,PA853W+,PA903X+,PA703W+,PA753W+

 

 
Specifications:
Product name: Projector Lamp
Model No. HS420AR12-9
Condition: 100% Brand new
Type: Compatible Bare lamp 
Lamp power: 420W
Life time : ≥2000-5000HourS
Used in the these projector: PA803U+,PA653U+,PA853W+,PA903X+,PA703W+,PA753W+
Installation: Easy installation.
Warranty: All items have been QC tested and 90 days Warranty at least
Package: Each lamp in a single box with foam protection. One pair gloves and instruction inside.

 
 
If you want your Projector Lamps work longer, please Note:
 
1. Do not allow the projector to overheat; the primary cause of lamp failure is excessive temperature stress.
2. Allow the projector lamp to cool for at least 10 minutes after powering down, and never move the projector during this period or while the lamp is on. The lamp is much more susceptible to damage while it is hot.
3. Operate your projector in a clean, relatively dust-free environment to prevent clogging of fans and air filters. These filters should be cleaned regularly.
4. Allow plenty of space around the projector's fan or exhaust so excess heat can be dispersed properly.
5. Utilize the "economy mode" if it is available with your projector model and is appropriate for your situation. This mode
decreases projector brightness but the lamp will last longer.
6. Never leave a projector in very hot or very cold environments, for example in a car on a summer or winter day.

 
 
Installation:
 
1. Turn off the Projector and unplug the AC power cord.
2. Loosen the screw on the lamp cover with a screwdriver, and then open the lamp cover.
3. Loosen the 2 screws on the lamp with the screwdriver. Hold up the handle, then pull the lamp straight out.
4. Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 2 screws.
5. Close the lamp cover, and then tighten the screws
6. Plug in the AC power cord.
 

 

HS420AR12-9 Bare projector lamp NEC Projector Bulbs Original new NP42LP 0HS420AR12-9 Bare projector lamp NEC Projector Bulbs Original new NP42LP 1HS420AR12-9 Bare projector lamp NEC Projector Bulbs Original new NP42LP 2HS420AR12-9 Bare projector lamp NEC Projector Bulbs Original new NP42LP 3